The aluminum motor housing enclosure with water cooling circuit is extruded and carry out the cooling water circulation in the shell inner liner Take away the heat generated when the motor is running This process makes the motor shell almost without heat dissipation Water circulation replaces cooling fans.
The research and development of aluminum extrusion motor housing enclosure has successfully replaced the aluminum die casting motor housing enclosure The problem of aluminum die casting motor shell is the poor density of material, which is easy to cause casting defects such as porosity, porosity, etc. the defects of poor surface casting roughness and corrosion resistance are successfully avoided.
Application:
Henan Chalco produced aluminum motor housing enclosure with water cooling circuit has better performance than other materials: lightweight; low noise; using Aluminum Alloy 6063 as material, through hot extrusion, energy saving and high efficiency Inner hole concentricity ≤ 0.07mm The shell of water-cooled aluminum alloy extrusion motor produced by our company breaks through the technical problem of motor heat dissipation. Its water jacket structure, circulating water cooling mode, unique special profile extrusion process, special argon arc welding process and shaping process are adopted, and the first spiral water dividing tank on the inner wall is created, which effectively improves the heat exchange efficiency and heat dissipation performance of motor products
Aluminum motor housing enclosure with water cooling circuit is mainly used in micro motor, environmental protection air conditioning motor, water cooling air conditioning motor, air compressor motor, negative pressure blower, motor, electric tricycle motor, cooling tower machine, electric tool motor, gear motor, etc.
Specs:
Item |
Alloy |
Temper |
Surface |
Usage |
Common aluminum motor housing enclosure, inner hole non cutting motor shell |
6063、6063A |
T5、T6 |
Extruded mill surface; Color anodized surface; c. Color painted surface |
Non explosion proof motor |
6063 |
Non explosion proof motor |
The magnesium content of shell profile for explosion-proof motor shall be no more than 0.5%, and other requirements shall conform to the 6063 brand in GB / t3190-2008.
Chemical composition:
Alloy |
Chemical component(%) |
|||||||||||
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Zr |
Other |
Al |
||
Each |
Total |
|
||||||||||
6063 |
0.20-0.6 |
≤0.35 |
≤0.10 |
≤0.10 |
0.45-0.9 |
≤0.10 |
≤0.10 |
≤0.10 |
- |
≤0.05 |
≤0.15 |
Remain |
6063A |
0.30-0.6 |
0.15-0.35 |
≤0.10 |
≤0.15 |
0.60-0.9 |
≤0.05 |
≤0.15 |
≤0.10 |
- |
≤0.05 |
≤0.15 |
Remain |
Mill finish surface:
Color anodized surface:
Color Painted surface: