5052 aluminum bar is AL-Mg series, which is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. When hardened by semi-cold work Good plasticity, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and polishing.
5052 aluminum bar uses are mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as mailboxes, gasoline or lubricating oil pipes, various liquid containers and other small deep-drawn Load parts: wire used to make rivets. It is also commonly used in sheet metal parts of transportation vehicles and ships, meters, street lamp brackets and rivets, hardware products, electrical enclosures, etc.
5052 aluminum bar can be produced into those types: 5052 aluminum round bar, 5052 aluminum square bar, 5052 aluminum flat bar, 5052 aluminum hexagon bar and 5052 aluminum angle bar.
Product advantages of 5052 aluminum bar:
Chalco aluminum bar produces are widely used in aviation, construction, automotive--these three major areas, high precision, small coarse crystal, uniform oxidation, good straightness, high turning performance, small grain size and moderate price, short delivery, all these prove us as the top of the world.
- Accuracy:+/-0.02mm
Purpose: to guarantee the automatic processing of high precision machining parts.
- Straightness <0.3m/2.5m
Purpose: Guarantee the speed requirements>8000 rpm, no material jittery.
- Coarse crystal ring<0.5mm
Purpose: To reduce the amount of turning by the customer, improve efficiency and reduce costs.
- Grain control
Purpose: to ensure that the 2、5、6、7 series aluminum alloy in the hard anodizing, anodizing uniform, color bright and beautiful.
- Turning performance improvement
To improve the processing of uniform chip, improve the processing of yards yield.
Extruded Aluminum |
Al-Alloy |
Temper |
Stretching Test |
Hardness HB |
Temper |
We Are Able To Produce Sizes Of |
||||||
Tensile Strength Rm/Mpa |
Yield Strength Rp0.2/Mpa |
Elongation A% |
OD |
ID |
Diagonal |
A/F |
Length |
|||||
5052 aluminum bar
|
5052 |
H112 |
>175 |
>70 |
>16 |
50 |
H111 H112 H32 H34 F |
3mm~ 130mm |
3mm~ 100mm |
3mm~ 130mm |
5mm~ 112mm |
1000mm~ 6000mm |
O |
175-245 |
>70 |
>20 |
40 |
Annealing |
TO |
|||||||
Hot work |
T1 |
H111 |
H112 |
|
||||
Cold work |
H12 |
H14 |
H16 |
H18 |
H32 |
H34 |
H116 |
H321 |
Heat treatment |
T3 |
T4 |
T5 |
T6 |
T8 |
|
|
|
Over aging treatment |
T73 |
T74 |
T76 |
T79 |
|
|
|
|
Stress relieved |
T351 |
T451 |
T651 |
T7351 |
T7451 |
T7651 |
T7951 |
T851 |
Mechanical Properties |
|||||||
Temper |
Tensile Strength Rm/Mpa |
Yield strength Rp0.2/Mpa |
Elongationg Percentage A% |
Hardness HB |
|||
5052 H112 |
Standard |
≥170 |
Standard |
≥70 |
Standard |
_ |
_ |
Actual |
210~220 |
Actual |
120~130 |
Actual |
21~26 |
50~60 |
Specification of 5052 aluminum bar:
-Alloy : 5052
By adding main element Mg,Has excellent processability, weldability and corrosion resistance, commonly used in decorative materials, appliance materials, can lid materials and a variety of structural materials
-Temper:O F H12 H14 H22 H24 H32 H34 H38 H111 H112
-Diameter: 3mm--130mm
-Length: 1000mm--6000mm
-Features :Strength is higher than 1100 series by 10%,Has excellent formability, weldability and corrosion resistance of the alloy.
-Applications:small boat, marine, architectural paneling, truck fuel tanks.